No products in the cart.
This is a high-performance data communications cable tested to be suitable for riser applications. Smartech Cables has manufactured this very cable with self-extinguishing jacketing for safety in riser applications. This particular cable is a high-performance category 6 augmented (or commonly referred to as cat6a) with CMR riser-rated jacket. It is a 1000ft long bulk cable.
This 1000ft cat6a riser cable has 23 American Wire Gauge AWG solid copper conductors; four unshielded twisted pairs that are easily identifiable color-striped pairs and thus, eight solid copper conductors. The 1000ft cat6a riser cable has been tested against its quality specifications. It is tested to suitable for indoor and outdoor applications and is capacitated to support up to 650mhzz bandwidth capacity. This is RoHS compliant and is suitable for 10BASE-T, 100BASE-TX Fast Ethernet, 1000BASE-T (IEEE802.3), 100VG-AnyLAN (IEEE802.12), 550 MHz Broadband Video, Voice, T1, ISDN, 155/ 622 Mbps ATM and ATM PoE (Power over Ethernet). It permits premium quality data transfer rates of 10 GB for a maximum distance of 100 meters. Likewise, this 1000ft cat6a riser cable bulk allows 10GBASE-T and all other LAN applications to be run for a maximum distance of 100 meters.
The CMR jacket on this cable bulk is denser and tougher in contrast with the regular CM cable jacket. This cable is perfect to be used in vertical riser-rated applications, for instance, between floors. When you are to choose the cable that should correspond to the needs of your installation site, we recommend you first check for plenum spaces. It is mandated to install plenum rated cables. Provided that these plenum spaces have high oxygen content because of the air circulation through them, and in any case of fire there will be a rapid flame progression; you must not use riser cables in these spaces because these cables are not strict with fire retardant properties in their insulations when compared to the plenum rated cables. This 1000ft cat6a riser cable features self-fire extinguishing characteristics and is designed to be used in vertical applications for which it is tested for vertical burn test: it is suitable to prevent the spread of fire from one floor to another floor. It is intended to hinder the spread of obnoxious smoke and flames; therefore, it is recommended to be run from floor to floor, but not through plenum flow of air areas for which a plenum-rated cable should not be replaced with a riser rated cable.
Furthermore, this 1000ft cat6a riser cable bulk has relevant characteristics to cut down cross-talks in your transmissions so that you can enjoy uninterrupted signal and data transmission even at higher frequencies or for long-distance. The cable has been tested to provide more protection against Power Sum Equal-Level Far-End Crosstalk (PS-ELFEXT), Near-End Crosstalk (NEXT), and Alien Crosstalk (AXT). We have a selection of jacket colors available for this cable. It is supplied in a 1000’ spool, and the entire length of 1000ft is marked at every sequential foot.