Cat6a Cable 1000 ft Plenum Solid Copper Green:
Our cat6a cable 1000 ft plenum solid copper green is an ideal choice for running cables in an infrastructure whereby there is a requirement for the cables to be plenum-rated. It has been tested to meet or exceed Category 6 augmented (or commonly regarded as cat6a) standards of the industry. This is a RoHS compliant cable which conforms to TIA/EIA 568.2C standard.
This cat6a cable 1000 ft plenum solid copper green bulk is perfect for 10BASE-T, 100BASE-TX Fast Ethernet, 1000BASE-T (IEEE802.3), 100VG-AnyLAN (IEEE802.12), 550 MHz Broadband Video Voice, T1, ISDN 155/ 622 Mbps, and ATM PoE (Power over Ethernet). It has been tested to be able to support up to 750 MHz bandwidth frequencies, and up to data transfer rates of 10 GB. Unlike the regular Cat6 cable or any previous generation cable, for that matter, this Cat6a plenum cable allows 10GBASE-T and all other LAN applications to be run for a maximum distance of 100 meters. It even allows maximum data transfer rates of 10 GB for a maximum distance of 100 meters.
This cat6a cable 1000 ft plenum solid copper green bulk is intended to be used in plenum spaces. Plenum spaces refer to those in a structure through which air circulates, and therefore there exists a high presence of oxygen. Because of the high levels of oxygen, such places are prone to easily catch fire, and furthermore, in an event of a fire in these spaces the spread or the flame progression is bound to be rapid. Therefore, it is mandated that you install a good quality plenum rated cable in a plenum space. This particular cat6a plenum cable 1000 ft plenum has been tested for CMP plenum-ratings, as a result, it does not burn with harmful smoke. Moreover, because the plenum rated cables have special fire retardant coatings on it, they do not catch themselves on fire. Similarly, they are sunlight proof as well. Apart from the plenum rated insulation on this cable, it has 23 American Wire Gauge AWG, four unshielded twisted pairs, and eight solid copper conductors. The conductors are made of 100% solid copper for enhanced conductivity and smoother transmissions with lesser cross talk and excellent attenuation.
In Compliance With ANSI/TIA standards, our network cables are also tested with Fluke DTX-1800 Versiv Cable Analyzer. Cat6a is Cross talk is simply the unwanted signal distortion that takes place as a result of coupling between transmission- in other words when a signal a cable confuses with a signal from another cable that runs nearby. This cat6a cable has more twists in it and there are tighter wounds within the cable. The twists are made to be tight and consistent. This coupled with the strong and thick sheathing allows more resistivity against different kinds of cross-talks. Thus, it provides more protection against Power Sum Equal-Level Far-End Crosstalk (PS-ELFEXT), Near-End Crosstalk (NEXT) and Alien Crosstalk (AXT). In simpler terms, what it means is that you will have more efficient data transmissions; the signals will not be confused with each other and your data integrity will be maintained.