1000ft Cat6 Bare Copper Ethernet Cable:
This Smartech Cables’ 1000ft cat6 bare copper ethernet cable is the best solution to your network requirements. We recommend it in applications that require high bandwidth and high data transfer rates with the least amount of interference. This cable will provide you quality without throwing you off your budget.
This cable has a single, solid conducting wire as the conductor made of pure copper for improved conductivity. It has 23 American Gauge Wire, and there are four unshielded twisted pairs of solid copper- all being in different colors and eight solid copper conductors as opposed to copper clad aluminum. The external insulation on this Ethernet cable is high-density polyethylene (HDPE) insulation and this insulation contains certain fire-retardant properties in it. Whenever you are installing cables in plenum spaces, you must check that the cables used in such spaces are plenum-rated. Plenum spaces are those spaces in a building in which air circulation takes place. In these spaces, you must install cables that are plenum rated because, in these spaces, fire can spread out really quickly. Our 1000ft cat6 bare copper ethernet cable with a plenum-rated outer jacket has been tested for CMP (FT6) plenum-ratings. .Furthermore, it has been designed to meet the National Fire Protection Association standard NFPA 90A. It has the potential to hinder the spread of fire, and on top of that, this cable does not burn with harmful and toxic smoke. It is also sunlight proof because of the protective insulation.
The specifications for our 1000ft cat6 bare copper ethernet cable have been improved even more. It can now support high bandwidth frequencies and high data transfer rates. It has been tested to support bandwidth frequencies of up to 550 MHz, and data transfer rates of up to 1000Mbps or 1Gbps. You can use them ideally for 10BASE-T (Ethernet), 100BASE-TX (Fast Ethernet) 1000BASE-T (Gigabit Ethernet GbE) and 10BASE-T (10-Gigabit Ethernet). Moreover, this 1000ft cat6 bare copper ethernet cable is also highly effective in reducing cross-talks between cables because the cable is made to be thicker. This thickness makes the cables more resistant to Near-End Crosstalk (NEXT) and Alien Crosstalk (AXT): this all, in turn, ensures greater data integrity with reduced packet loss and delay in cables. The twists in the cables are made to be tighter; this also helps to reduce this cross-talk.
This particular cable comes in standardized measurements of 1000FT-with every foot marked in sequence on the jacket of the cable for your ease. You can unreel the length you need, easily measuring it with the help of the markings and storing the rest if you want.