Riser Cat6a 1000Ft Bulk Cable Solid Copper UTP Spool

Availability:

112 in stock


$279.99

BlueWhiteGreenRedYellowGrayBlack
Clear

Riser Cat6a 1000Ft Bulk Cable:

This riser cat6a 1000ft bulk is a high-performance Ethernet cable, perfect if you want to wire up your home, office or any building for that matter. It is a category 6 augmented (or commonly referred to as cat6a) cable that is available at Smartech Cables in various configurations: it comes in a plenum-rated jacket, riser-rated jacket and/or a PVC jacket. This particular cable is a 1000ft bulk with riser rated outer jacket in white, blue, green and yellow color.

For 10BASE-T, 100BASE-TX Fast Ethernet, 1000BASE-T (IEEE802.3), 100VG-AnyLAN (IEEE802.12), 550 MHz Broadband Video Voice, T1, ISDN 155/ 622 Mbps, and ATM PoE (Power over Ethernet), this riser cat6a 1000ft bulk white is our hot-selling cable. It ensures high data transfer rates, bandwidth speeds, greater data integrity with enhanced capability to cut down cross-talk, and uninterrupted transmissions even at longer distances and higher frequencies. It is tested to support up to 750 MHz bandwidth frequencies. It allows premium quality data transfer rates of 10 GB for a maximum distance of 100 meters. Likewise, this riser cat6a 1000ft bulk allows 10GBASE-T and all other LAN applications to be run for a maximum distance of 100 meters.

Apart from its attestation to support high data transfer rates and bandwidth speeds, this riser cat6a 1000ft bulk features 23 American Wire Gauge AWG, four unshielded twisted pairs, and eight solid copper conductors and this cable is Fluke test verified to certify that it conforms to the prevalent industry standards for crosstalk and attenuation tolerances. The twisted pair design in the cable conforms to the practices of the industry. The twists are maintained to be tight to enhance electromagnetic compatibility and a reduction in cross-talks. The tighter twists in addition to the strong and thick sheathing of this cable make it very effective against different kinds of cross talk and other electromagnetic interferences. Cross talk is that annoying effect that is produced when a signal from a cable overlaps and confuses with another signal from another cable that is adjacent to it or is running nearby. As an outcome, signal bleedings and distortions occur which undermine the integrity of your data and lead to loss of data packets. This riser cat6a 1000ft bulk with riser-rated jacket delivers enhanced protection against Power Sum Equal-Level Far-End Crosstalk (PS-ELFEXT), Near-End Crosstalk (NEXT) and Alien Crosstalk (AXT).

The external jacket of this riser cat6a 1000ft bulk white is Riser-Rated (CMR). It is suitable for riser applications: vertical riser-rated applications, for instance, between floors with no environmental air. This riser cat6a 1000ft bulk features self-fire extinguishing characteristics and is designed to be used in vertical applications for which it is tested for vertical burn test: it is suitable to prevent the spread of fire from one floor to another floor. It is intended to hinder the spread of obnoxious smoke and flames; therefore, it is recommended to be run from floor to floor, but not through plenum flow of air areas for which a plenum-rated cable should not be replaced with a riser rated cable.

SKU: STC-A612-22 Category: Tag:
>> PoE: IEE 802.3af / IEEE 802.3at (PoE+)
>> Color: Blue, White, Yellow, Red, and Green
>> Cable: Cat6a CMR O.D. 8.1 ± 0.2 mm
>> Conductor: O.D. 1.06 – 1.10 mm – 4 Twisted Pairs
>> Frequency: 750 MHz
>> Wire Gauge: 23 AWG
>> Applications: IEEE 802.3 an, 1GB, 10GBase-T and Legacy Speeds
>> Bending Radius: 4 x Overall Diameter
>> Spline Separating: 4 Pairs
>> Installation Temp: 0°C to 60°C
>> Length & Package: 1000 Feet on Wooden Reel
>> Jacket & Shielding: FEP – Unshielded

 

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Riser Cat6a 1000Ft Bulk Cable Solid Copper UTP Spool”

There are no reviews yet.