Category 5e Plenum:
With our category 5e plenum-rated 1000ft, you can enjoy better conductivity, smoother and high-speed transmissions with the least amount of bit errors, interference and cross talk. This cable is high speed Ethernet cable that we recommend you use for 10Base-T (Ethernet IEEE 802.3), 100 Vg-Any LAN (IEEE 802.12), 100Base-TX (Fast Ethernet IEEE 802.3u), TP-PMD (ANSI X3T9.5), 1000BASE-T (Gigabit Ethernet GbE), and generally for applications where high bandwidth and high data rates are required.
Our category 5e plenum-rated 1000ft it has the capacity to handle bandwidth speed of up to 350 MHz and it is suitable to support up to 1000 Mbps gigabit speeds. Therefore, you can readily use this cable for Ethernet applications up to 1000BASE-T (Gigabit Ethernet).
It has 24 American Wire Gauge (AWG) solid conductors. There are four unshielded twisted pairs, and eight solid conductors made of copper for enhanced conductivity. The tighter wounds in the internal cable structure interference in the cables are kept at bay, and excellent attenuation is achieved. In addition to that, the outer sheathing in this Cat5e cable when compared to any regular category 5e plenum-rated 1000ft is designed to be very strong and thick. This is done so that there is a cut down in cross-talk between the cables. Cross talk occurs when signals from cables that are close to each other overlap each other and disturb each other. This hinders the overall smooth transmission of your data, and the quality as well as the data transmission rate, and bandwidth frequency are also undermined. Our category 5e plenum-rated 1000ftprovides more protection against Power Sum Equal-Level Far-End Crosstalk (PS-ELFEXT), Near-End Crosstalk (NEXT) and Alien Crosstalk (AXT). This means that the integrity of your data will be protected and there will be a reduction in the loss of data packets while the data travels through the cables.
Smart Tech Cables manufactures its own products giving due regards to the standards of the industry. Our products not only meet but exceed the pre-set standards and they also observe standards and codes of relevant authorities. Our Cat5e cable is not only EIA/TIA verified and RoHS compliant, but it is has been tested for CMP plenum-ratings, and this cable has been manufactured observing the National Fire Protection Association NFPA 90a standard. Therefore, you can ideally use it in applications that require performance and which require the plenum rated outer jacket. The outer jacket of this particular cable is in green color. This jacket is a plenum rated jacket, which is made of special materials and coatings containing fire-retardant properties.
Therefore, this cable is also regarded as a low-smoke or low-flame cable. If you are installing in areas, whereby it is required by the authorities to install plenum cable, you must do so because, in any event of the fire, these areas (also known as plenum areas) can make the fire progress rapidly because of the high content of oxygen present in these areas. These plenum areas are basically, are those areas in a building through which the air containing high oxygen circulates for cooling, heating, ventilation and so on. We recommend you use our category 5e plenum-rated 1000ft cable will not melt away with fumes and smoke that is harmful to health. And this cable is also sunlight proof owing to the plenum-rated outer jacket.