Cat5e UTP PVC Cable 1000ft Solid:
For non-plenum applications with requirements for bandwidth-intensive data transmissions, high data transfer rates, excellent attenuation, reduced cross talk, protected data integrity, and a low bit error rate; this cable is intended to be perfect. This particular cat5e UTP PVC cable 1000ft enhanced or commonly regarded as a cat5e cable with Polyvinyl Chloride PVC jacket in gray color.
This cable is manufactured to meet current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801and other relevant codes by the relevant authorities. It even exceeds some standards for instance; the base standard base laid down by TIA/EIA for cat5e is to support 100mhz but our cat5e UTP PVC cable 1000ft gray, yellow, blue, white, green red is rated to support bandwidth frequencies of up to 350mhz and as for the data transfer rates, this cable can transmit up to 10/100/1000Mbps.
This cable features 24 American Wire Gauge AWG, thicker and durable external jacket, four unshielded twisted pairs and eight solid conductors. The external jacket on this cat5e UTP cable 1000ft is a Polyvinyl Chloride PVC rated jacket with high-density polyethylene (HDPE) insulation. The PVC jacket is durable and therefore, perfect for long term use. In addition to that, the PVC jacket has some fire retardant properties to it; however, they are not to be seen as a substitute for the fire retardant properties in a plenum rated cable. Thus, a PVC cable is not to be installed in place of a plenum rated cable in a plenum space. Plenum spaces are convenient for air circulations for heating, cooling, ventilation and likewise, due to which there is high oxygen content in these spaces making them prone to catch fire easily and allow rapid flame progression.
Additionally, this cat5e UTP PVC cable 1000ft is specialized to provide you with smooth transmissions with reduced delay, reduced loss of data packets and greater data integrity. One of the prime differences between this cat5e UTP PVC cable 1000ft and the previous generation of the cat5 cable is the ability of the former to cater to cross-talks and electromagnetic interference or EMI for short. For the purpose, our cat5e UTP PVC cable 1000ft is made of thicker sheaths and it incorporates tighter twisted pairs. The twisted-pair cabling helps to cancel out the unwanted effect when a signal from a cable is confused with a signal from a nearby cable i.e. cross-talk. Therefore, this cable is intended to provide you with protection against Power Sum Equal-Level Far-End Crosstalk (PS-ELFEXT), Near-End Crosstalk (NEXT) and Alien Crosstalk (AXT).
The cable jacket is available in multiple colors. The cable of 1000ft length comes in a bulk packed in the pull-out box. The entire length of the cable is marked for every foot. This makes installation very easy for you. You can just pull out the length you want.