1000ft Cat6a Bulk Plenum Cable UTP Solid Copper

Availability:

Out of stock


Compare

$329.99

BlueWhiteGreenRedYellow
Clear

1000ft Cat6a Bulk Plenum Cable:

Smartech Cables ought to define connectivity with quality and affordability. If you are wiring up in places whereby quality and high performance with high data transfer rates, high bandwidth speeds, exceptional attenuation, reduced cross talk, protect data integrity and low bit error rate constitute as requirements, Our 1000ft cat6a bulk plenum cable yellow, green, white, blue color solid copper is perfect for you. It has been tested to support up to 750mhz bandwidth frequencies, and it allows 10GBASE-T and all other LAN applications and maximum data transfer rates of 10 GB for a maximum distance of 100 meters.

The category 6 augmented cable (or commonly referred to as cat6a cable) is available in multiple configurations. This particular 1000ft cat6a bulk plenum cable yellow is a plenum rated outer jacket. It has 23 American Wire Gauge AWG, four unshielded twisted pairs, and eight solid copper conductors. The conductors used in its manufacturing are 100% pure solid copper conductors. Pure copper has improved conductivity and brings about smooth transmission with minimum loss of data packets. The 1000ft cat6a bulk plenum cable yellow solid copper is specially intended to be run in plenum spaces. A plenum space or an air handling space is simply space whereby air circulation takes place, and as of consequence, their high oxygen levels present there. High oxygen levels make such spaces vulnerable to catch fire easily, and in an unfortunate outbreak of fire, the oxygen helps inflame progression. It is mandated by the relevant authorities to install plenum rated cables in these spaces because they have special insulation and coatings on them of fire-retardant properties. They act as a hindrance to the rapid-fire progression in the space. This low smoke 1000ft cat6a bulk plenum cable yellow has not only been tested for CMP plenum-ratings, but it is also manufactured to be consistent with the National Fire Association Standard NFPA 90A. It is highly efficient to be run in these areas. Moreover, as a result of the aforementioned coatings and insulation, this cable is sunlight proof as well.

Whenever you are choosing the right cable to suit your interest, other than the cable’s data transfer rates, Ethernet applications, bandwidth, performance, you should consider its ability to cut down cross-talks. Cross talk occurs when a signal from a cable bleeds and confuses with a signal from another cable that is running close by. The effect it produces can be a nuisance and can seriously undermine the quality of your transmissions especially at higher frequencies. This 1000ft cat6a bulk plenum cable solid copper has more twists in it and the twists are made to be tight and consistent. This in addition to the strong and thick sheathing allows more resistivity against different kinds of cross-talks. Thus, it provides more protection against Power Sum Equal-Level Far-End Crosstalk (PS-ELFEXT), Near-End Crosstalk (NEXT) and Alien Crosstalk (AXT). In this way, you will have uninterrupted smooth transmissions even at higher frequencies and longer distances. The data integrity will be protected once there are uninterrupted signal transmissions with reduced loss of data packets.

>> PoE: IEE 802.3af / IEEE 802.3at (PoE+)
>> Color: Blue, White, Yellow, Red, and Green
>> Cable: Cat6a CMP O.D. 8.1 ± 0.2 mm
>> Conductor: O.D. 1.06 – 1.10 mm – 4 Twisted Pairs
>> Frequency: 750 MHz
>> Wire Gauge: 23 AWG
>> Applications: IEEE 802.3 an, 1GB, 10GBase-T and Legacy Speeds
>> Bending Radius: 4 x Overall Diameter
>> Spline Separating: 4 Pairs
>> Installation Temp: 0°C to 60°C
>> Length & Package: 1000 Feet on Wooden Reel
>> Jacket & Shielding: FEP – Unshielded

 

 

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “1000ft Cat6a Bulk Plenum Cable UTP Solid Copper”

There are no reviews yet.