Ethernet cables after their development are catering to a wide range of consumers to stabilize their network connection and get fast internet speed. Likewise, there are advanced ethernet category 6 cables to enhance your networking experience. Here, let’s delve a bit deeper into the features and characteristics of ethernet cables.

Why Cat6 Cable — Superior solution for your networking needs. Adopt the best bulk ethernet cables to entertain your networking equipment.

What is Bulk Category 6 Cable?

In the ethernet category, Cat6 is the next advanced ethernet cable used for longer runs due to its high speed and bandwidth. The cable is designed to facilitate the user to get the speed of their choice – gigabit speed up to 10 Gbps. The cable can be used to install in commercial and residential and also for industrial applications. The 1000ft cat6 cable can ease your installation and fulfill the length requirements. The bulk cat6 ethernet cable has the ability to obstruct (Crosstalk and Interference) present in the installation field. Here is what’s inside the cable jacket.

Bulk Cat6 Ethernet Cable — The Anatomy

Bulk Cat6 cable has some of the major features that make this cable the best choice for consumers to deploy for their daily usage. Here is what you need to know. The cat6 cable comes with 8 separate wires – conductors (cat 6 pure CCA cables or cat 6 pure copper cable). These 8 wires have a specific diameter – 23 AWG to deliver maximum throughput. These 8 wires are color-coded and make 4 twisted pairs according to the color combination set as per rule. The twists in these pairs are tight enough to cancel external interference and attenuation. This will help in clear signal transmission and excellent speed.

Furthermore, there are also some other features that you should know about best bulk cat6 cable. The cable has a plastic wire separator running between the twisted wires – Spline to separate twisted pairs to restrict pair-to-pair crosstalk. The entire length of the cable is installed with the fiber cord technically named a rip cord which eases the peeling process of the ethernet cable.

For a novice, it is mandatory to understand the terminology of ethernet cable to select the right type of ethernet cable. As the internal conductor is of much importance similarly is the case with internal shielding of the cable. Peek into more options for Cat6 Ethernet cables.

Transmission Speed And Recommendations

Bulk cat6 cable shows the best speed according to its counterparts — Cat5 cable. The speed specs of the cable are 1 Gbit/s and 10 Gbit/s. The recommended length of the cable is 100 meters (328 ft). The cable delivers 1 Gbps speed at a distance of 100 meters and 10 Gbps speed at a length of 50 meters (164 ft) approximately.

For Installation – The maximum elasticity of ethernet cable is up to 25 lbs or (110 N).

The cable has a 23 AWG diameter size that is ideal for supporting high bandwidth applications like HD streaming and heavy data transmission. The maximum bandwidth of Cat6 is 550 MHz. Such speed and bandwidth are surely adopted for running fast ethernet applications like 100/1000/10GBASE, PoE, A/V streaming, gaming consoles, IoT, and ATM 155.

Cat6 Plenum Vs Cat6 Riser-Rated Cables

There are two possible installation locations one is the plenum and the other is the riser. The plenum spaces are the airy spaces with maximum oxygen supply and that is why plenum cables are designed to be installed in the plenum spaces of the buildings.

The plenum cable is an FEP-rated material — a highly flame-retardant material to restrict fire progression. The plenum jacket is less likely to catch fire and its LSZH properties are likely to add more to its attributes. The cable emits non-toxic smoke. The Cat6 plenum cable is used to install in horizontal spaces (Ventilation, air ducts, above raised floors, and the HVAC system of the building).

The plenum jacket is also UV-resistant and bears extreme temperatures. But this cable is only for indoor usage for the maximum safety of the cable and internal conductors. You can use plenum cables in non-plenum spaces – riser.

Riser — another outer jacket to use in vertical spaces of the building. The riser exhibits fire resistance properties. The PVC (Polyvinyl Chloride) material is for indoor use only and cannot be installed outdoors.

The Cat6 riser cables can be installed in elevator shafts and inside walls where these cables proved to show maximum lifespan. There is a little chance that the cable might get damaged. To identify plenum or riser jackets most commonly used acronyms for plenum cables are PL, CMP, PLM, etc and for riser, CMR is used.

CCA Vs Copper Conductor — Which Is Best?

Always choose copper cables when there is a case for data networking as copper is nonresistant to electrical conduction and is also the best conductor for passing electrical signals without fluctuating signal quality. The copper conductor has a longer lifespan than the CCA conductor. If you are going to install cable for longer run use – opt for the copper cables to streamline your data speed and user experience.

On the other hand, the CCA cables are chosen when the performance is not a major concern. The CCA cable (Copper-Clad Aluminum) cable is less expensive than copper cables. Can be installed more easily, and flexibly. This is the main attribute of CCA cables. In the CCA conductor, the copper is cladded over aluminum to transfer signals. The CCA conductor is not good for longer usage and for PoE applications.

Cat6 plenum pure copper or CCA cables are two options for you to choose from for your networking needs. The right quality cable will result in higher data transmission rates.

Cat6 Shielded And Unshielded – Difference

The next-gen cat6 ethernet 1000ft cable comes in two variants – Shielded (STP) or unshielded (UTP). What is the difference? If you are finding difficulty in comparison between STP and UTP. Let me make it more clear and understandable.

There are two types of installation processes, bulk installations like in offices and in buildings, schools, and warehouses. Such bulk installations need to be accessed properly for any complex wiring structure already present in the field. Cat 6 shielded cables are meant for such environments. The shielded cable has a foil or braid shield inside the cable and throughout the length of the cable to potentially secure signals. The shield keeps signals integrated and less likely to interact with outside signals – EMI or RFI to cause data loss or slow speed.

The Cat6 shielded plenum cables offer high data transmission speeds, and maintain signal strength, quality, reliability, and longer lifespan. If you’re going to implant cables in already existing cabling environments you need to use shielded cat6 cables to get high-speed connectivity.

To identify shielded Cat6 cables just read the printed text on the cable jacket as F/UTP (Cat6 Plenum F/UTP Copper Cable).

Unshielded or UTP cables are general ethernet cables with a lack of internal shielding. The cable can be used to be installed in offices, schools, and residential buildings. There is a difference in price and installation is quite easy using UTP Cat6 cables. But one thing is very important — quality. The UTP cables also cancel crosstalk and interference due to their tightly twisted pairs. Here is more information regarding the bulk CAT6 ethernet cable. You might be wondering why plastic jackets with LAN cables have different ratings.

Why Are Industry Standard Cables Important?

(American National Standard Institution) ANSI and TIA (Telecommunications Industry Association) altogether made some standards for networking cabling to secure its usage and reliability. ETL (Electrical Testing Laboratories) and UL (Underwriters Laboratories) are the two standards that define cable manufacturing standards and also apply that cable meets the industry standards for use for networking purposes.

While buying Cat6 shielded cable or unshielded, plenum or riser cables make sure to buy industry-compliant cables to secure your cabling infrastructure. These standards are set to avoid any misconception or wrong buying.

Cat6 ethernet cables are ANSI/TIA 568.2-C verified and are RoHS compliant. Feel free to order your desired cables from our wide range to satisfy your needs.

Easy Installation — Bulk Cat6 Cable

The Cat6 comes in two convenient packing – an easy-to-pull box and a wooden spool roll to use for installation purposes. The tangle-free packing makes installation very easy and less effort is required to deploy the cable properly. If you want to measure the cable length there is no problem with that as the entire length of the cable is labeled with “Ft” markings. So it's easy to identify the remaining length of the cable.

The untangled cable design is our next step to ease the installation process. Buy our high-quality original ethernet cables to protect your cabling infrastructure and run your daily operations smoothly. Order now it's very simple.